Connectors
Plastic and nylon connectors for joining multiple wires with a single connection. These connectors closely or exactly match original equipment manufacturer specifications and are used throughout the vintage motorcycle and automotive industries.
4mm 2-pin Black Rubber Connector
2-pin 4mm black plastic connector pair, with terminals
4mm 3-pin Black Rubber Connector
3-pin 4mm black plastic connector pair, with terminals
Honda Solenoid Connector
Aftermarket replicas of the four pin solenoid connectors found in most Hondas manufactured from the late 1970s through the 1980s
MOSFET Regulator / Rectifier Connector
High quality MOSFET connectors for your new regulator/rectifier
Yamaha Control Connector
Connector pairs and terminals for use with Vintage Yamaha Controls
6.3mm 2-Pin Flasher Relay Connector
2-pin right-angle flasher relay connector, with terminals
7.8mm 1-pin Latching M/F Nylon Connector
1-pin latching 7.8mm spade-based connector pair, with terminals
Early Honda Ignition and Stator Connector
These specialty connectors are the same as those found in many early Hondas (especially the twins) and were used for the connections on the ignition switch as well as the stator.
6.3mm 1-pin Non-Latching M/F Nylon Connector
1-pin non-latching 6.3mm spade-based connector pair, with terminals
6.3mm 2-pin Non-Latching M/F Nylon Connector
2-pin non-latching 6.3mm spade-based connector pair, with terminals
6.3mm 3-pin Non-Latching M/F Nylon Connector
3-pin non-latching 6.3mm spade-based connector pair, with terminals
6.3mm 4-pin Non-Latching M/F Nylon Connector
4-pin non-latching 6.3mm spade-based connector pair, with terminals
6.3mm 6-pin Non-Latching M/F Nylon Connector
6-pin non-latching 6.3mm spade-based connector pair, with terminals
6.3mm 8-pin Non-Latching M/F Nylon Connector
8-pin non-latching 6.3mm spade-based connector pair, with terminals
6.3mm 1-pin Latching M/F Nylon Connector
1-pin latching 6.3mm spade-based connector pair, with terminals
6.3mm 2-pin Latching M/F Nylon Connector
2-pin latching 6.3mm spade-based connector pair, with terminals
6.3mm 2-pin Latching M/F Nylon Connector (Parallel)
2-pin latching 6.3mm spade-based connector pair, with terminals. This connector has both terminals aligned in parallel, one on top of the other. Commonly used for ignition coils and solenoids.
6.3mm 3-pin Latching M/F Nylon Connector
3-pin latching 6.3mm spade-based connector pair, with terminals
6.3mm 4-pin Latching M/F Nylon Connector
4-pin latching 6.3mm spade-based connector pair, with terminals
6.3mm 6-pin Latching M/F Nylon Connector
6-pin latching 6.3mm spade-based connector pair, with terminals
6.3mm 8-pin Latching M/F Nylon Connector
8-pin latching 6.3mm spade-based connector pair, with terminals
2.8mm 2-pin Non-Latching M/F ABS Connector
2-pin 2.8mm spade-based non-latching connector pair, with terminals
2.8mm 3-pin Non-Latching M/F ABS Connector
3-pin 2.8mm spade-based non-latching connector pair, with terminals
2.8mm 4-pin Non-Latching M/F ABS Connector
4-pin 2.8mm spade-based non-latching connector pair, with terminals
2.8mm 6-pin Non-Latching M/F ABS Connector
6-pin 2.8mm spade-based non-latching connector pair, with terminals
2.8mm 9-pin Non-Latching M/F ABS Connector
9-pin 2.8mm spade-based non-latching connector pair, with terminals
2.8mm 2-pin Latching M/F Nylon Connector
2-pin 2.8mm spade-based latching connector pair, with terminals
2.8mm 3-pin Latching M/F Nylon Connector
3-pin 2.8mm spade-based latching connector pair, with terminals
2.8mm 4-pin Latching M/F Nylon Connector
4-pin 2.8mm spade-based latching connector pair, with terminals
2.8mm 4-pin Latching M/F Nylon Connector (RED)
4-pin 2.8mm spade-based, red, latching connector pair, with terminals
2.8mm 6-pin Latching M/F Nylon Connector
6-pin 2.8mm spade-based latching connector pair, with terminals
2.8mm 9-pin Latching M/F Nylon Connector
9-pin 2.8mm spade-based latching connector pair, with terminals